英文字典中文字典


英文字典中文字典51ZiDian.com



中文字典辞典   英文字典 a   b   c   d   e   f   g   h   i   j   k   l   m   n   o   p   q   r   s   t   u   v   w   x   y   z       







请输入英文单字，中文词皆可：

redivivus    

安装中文字典英文字典查询工具!


中文字典英文字典工具:
选择颜色:
输入中英文单字

































































英文字典中文字典相关资料:


  • Cross-Contamination of Sensors by Other Gases and the Influence on . . .
    Many electrochemical sensors incorporate a filter into the housing to limit the exposure from interfering gases These filters have a limited capacity that is typically rated in ppm-hours Figure 1 shows the filter capacity from one particular carbon monoxide sensor Figure 1: Filter Capacity in ppm-hours
  • Carbon Monoxide Sensors: How do they Differ and Why does Cross . . .
    The CO H2 null sensor does its best to completely nullify the effect of H2 on the CO sensor In practice, a CO H2 null sensor will typically have 1% or less H2 cross-interference Going back to the example again, a standard CO sensor exposed to 100 ppm H2 would interpret it as 22 ppm CO
  • Compensating for Hydrogen Interference in Carbon Monoxide Readings - RKI
    To compensate for H2 interference an extra electrode is added to the sensor That electrode enables the sensor to measure H2 only The electronics will then subtract the H2 specific signal from the combined H2 and CO signal to provide an accurate CO reading
  • Gas Sensor Cross Sensitivity (2025 Ultimate Tables) - Forensics Detectors
    To minimize cross sensitivity, several strategies can be employed, such as using gas filters, optimizing the sensor design, and applying calibration and compensation techniques What type of Cross Sensitivities Are There? Positive Response: The sensor responds to the target gas and another gas
  • SENSOR SPECIFICATIONS AND CROSS-SENSITIVITIES - Honeywell
    Bias Equilibration: Some electrochemical sensors (NO, NH3) require a bias voltage to detect the gas, while most do not Unbiased sensors may be shipped with a shorting pin across the electrodes to avoid an accidental bias The pin should be removed before installation
  • Addressing CO Sensor Cross-Sensitivity Challenges
    These hydrogen-compensated CO sensors still use electrochemical technology, but they incorporate a filtering or dual-electrode system that recognizes and subtracts the hydrogen component from the total signal The result is a true CO reading with a resolution of 10 ppm, unaffected by H2 interference, even at concentrations as high as 2000 ppm
  • Dual Toxic (CO H2S) Electrochemical Gas Sensors - DD-Scientific
    DD-Scientific manufacture electrochemical gas sensors for monitoring both Carbon Monoxide (CO) Hydrogen Sulphide (H2S) within a single cell Our Dual toxic sensors are available with a choice of two operational ranges 0-1000 ppm CO 0-200 ppm H2S in the industry standard 4-series format and 0-1000 ppm 0-100 ppm H2S in the compact DceL format
  • Testo Tech Notes:
    An example of a common cross-interference to EC sensors occurs with the often used carbon monoxide (CO) sensors CO sensors respond to both CO and hydrogen (H 2) H 2 is a combustion by-product of fuel degradation and is often found in combustion sources with low levels of oxygen in the exhaust H 2 is not a factor in ambient air, nor
  • Cross-sensitivity compensation in electrochemical gas sensors.
    electrochemical gas sensor for CO is used here as an example A filter material based on po-tassium permanganate absorbs and binds the cross-gases NO, NO2 and SO2 an allows CO as well as the cross-gas H
  • Advanced Electrochemical Sensor for Toxic Gases Monitoring - ENMET
    Sensor Transmitter for H2, O2, CO, H2S and other Toxic Gases The SE-5175 Series Sensor Transmitters utilize electrochemical type cells to detect the target gas These cells consist of electrodes, electrolyte and an air liquid separation barrier





中文字典-英文字典  2005-2009