attachInterrupt() - Arduino Docs FALLING Interrupt wird getriggert, wenn der Pin von HIGH auf LOW wechselt Die Due-, Zero- und MKR1000-Boards erlauben zusätzlich: HIGH Interrupt wird getriggert, wenn der Pin HIGH ist
How to use Interrupts for analog pins? Help needed. The documentation for the Due says ALL DIGITAL PINS are available for interrupts Since the Analog pins can be set to Digital Pins using pinMode Thus, pinMode(A0, INPUT);
Interrupt on pin 0 and 1 (INT2 INT3) on Pro Micro - Arduino Forum Some pins are PCINT, you can use those as interrupts with a library (for example "EnableInterrupt") Please provide a full sketch, this one is not compiling There should be the word 'volatile' in your sketch, twice
Help with interupt - Programming - Arduino Forum During the time that these loops are executing, no other tasks can be done, including checking pins to see if the signals have changed That's why you are seeing interrupts as a potential solution But they might fix one problem and cause 2 new problems Better to avoid blocking code so that interrupts are not necessary
Pin interrupts on Rpi pico with arduno-pico code - Arduino Forum I'm using the Arduino IDE with the arduino-pico core and I'm trying to get pin interrupts working for a rotary encoder application Here is the code: #define ROTA 6 GPIO6 rotary encoder A #define ROTB …