英文字典中文字典


英文字典中文字典51ZiDian.com



中文字典辞典   英文字典 a   b   c   d   e   f   g   h   i   j   k   l   m   n   o   p   q   r   s   t   u   v   w   x   y   z       







请输入英文单字，中文词皆可：


请选择你想看的字典辞典：
单词字典翻译
scaraboid查看　scaraboid　在百度字典中的解释百度英翻中〔查看〕
scaraboid查看　scaraboid　在Google字典中的解释Google英翻中〔查看〕
scaraboid查看　scaraboid　在Yahoo字典中的解释Yahoo英翻中〔查看〕

安装中文字典英文字典查询工具!


中文字典英文字典工具:
选择颜色:
输入中英文单字

































































英文字典中文字典相关资料:


  • What is Taffic Storm Control and how to reduce it on the MikroTik . . .
    Another nice Layer2 security feature that I like it very much is: Traffic Storm Control Using this feature, you can limit broadcast storm on your interface, but not only that, you can also limit unknown multicast and unknown unicast
  • CRS3xx and CSS326-24G-2S+ series Manual - SwOS - MikroTik
    Multicast Flood Control: Flood Unknown Multicast - Changes the multicast flood option on a switch port, only controls the egress traffic When enabled, the bridge allows flooding multicast packets to the specified switch port, but when disabled, it restricts multicast traffic from being flooded
  • Storm control on egress - General - MikroTik community forum
    I’ve had a few scenarios where I got storm controlled and the port was shutdown The question is: how can I limit the outgoing bandwidth of combined broadcast, multicast and unknown unicast traffic streams to under 3 Mbps on the CRS317 in order to avoid getting storm controlled?
  • SwOS CSS326 - MikroTik Wiki
    When enabled, the bridge allows flooding multicast packets to the specified switch port, but when disabled, it restricts multicast traffic from being flooded The setting affects all multicast traffic, this includes non-IP, IPv4, IPv6 and the link-local multicast ranges (e g 224 0 0 0 24 and ff02::1)
  • Limit egress broadcast on specific interface - MikroTik
    On the Juniper, there’s a broadcast storm control set to 3000 (kbps) From their documentation: Configure the storm control level as the bandwidth in kilobits per second of the available bandwidth used by the combined broadcast, multicast, and unknown unicast traffic streams
  • Controlling Broadcasts and Multicasts - firewall. cx
    Broadcast or multicast storms are often caused by a fault that occurs during the device discovery process For example, if an IPX-based printing environment has been misconfigured, a print driver client may continually send SAP packets to locate a specific print server
  • QoS with Switch Chip - RouterOS - MikroTik Documentation
    Traffic Storm Control The same Ingress Port policer also can be used for traffic storm control to prevent disruptions on Layer 2 ports caused by broadcast, multicast, or unicast traffic storms Broadcast storm control example on ether5 port with 500 packet limit per second:
  • Storm Control Thresholds: How to Set Them Efficiently | NSC - NetSecCloud
    It's a network security feature utilized on switches that prevents specific types of traffic such as broadcasts, multicasts, or unknown unicast storms from overwhelming the network
  • Manual:CRS3xx series switches - MikroTik Wiki
    Traffic Storm Control Since RouterOS v6 42 it is possible to enable traffic storm control on CRS3xx series devices A traffic storm can emerge when certain frames are continuously flooded on the network
  • Multicast routing basics with RouterOS - MikroTik
    MikroTik does multicast routing! (Since end of 2008, ROS 3 0) Supports PIM-SM, IGMP proxy (great!) 10 camera (2Mbit stream each) = 20 Mbit no more! 2-2,5 Mbit camera enough! What network hardware you need? Thank You!





中文字典-英文字典  2005-2009