英文字典,中文字典,查询,解释,review.php


英文字典中文字典51ZiDian.com



中文字典辞典   英文字典 a   b   c   d   e   f   g   h   i   j   k   l   m   n   o   p   q   r   s   t   u   v   w   x   y   z       


安装中文字典英文字典辞典工具!

安装中文字典英文字典辞典工具!










  • Technical - Difference in Primers | The H. A. M. B. - The Jalopy Journal
    It cures with Fiberglass hardener so you have a good chemical bond You can build polyester pretty thick and this helps with all the pin holes around edges on fiberglass bodies One brand of polyester primer no one really uses but is less expensive than some of the more popular brands and is a good quality is USC part number 300-1
  • Technical - Which primer to use? | The H. A. M. B. - The Jalopy Journal
    Never heard of a polyester for small repairs only It’s designed for large repairs The question is make sure you use something that is direct to metal(DTM) at the start of the process Meaning, the bare metal areas need a DTM primer for adhesion An etch or epoxy are the main choices Then a filler primer, either urethane or polyester
  • Spray on filler Polyester primer ?s | The H. A. M. B. - The Jalopy Journal
    I now use PPG CRE Primer (Corrosion Resistent Epoxy) it is a Commerical coating, its cheap $40-$50 a gallon for both parts, its tintable, builds better then the Polyester plus its a corrsion barrier, can spray over bare metal and not have any problems with it, only dislikes it sands a little hard and you need to thin it done a bit to help it
  • Painting Sanding 2K primers | The H. A. M. B. - The Jalopy Journal
    i would bet he primed between if i have a heavily pitted, deep sand scratches or wavy panels i will do the two sanding steps 3 coats of filler primer over a coat of epoxy, block sand that dry with 180 or 220 , re prime 2-3+ coats depending on how much sanding i had to do to get it straight and smooth wet sand, as mentioned 400-600 depending on paint type i like to give at least a week of
  • What do I spray over epoxy primer? | The H. A. M. B. - The Jalopy Journal
    I'm no bodyman, but what I learned is epoxy primer, filler, sand, high build primer filler, wet sand, prime, sand, prime, sand, prime until you can't fucking stand it anymore Take a vacation Give it another once over, when there are no flaws, epoxy prime, top coat That was for a show car finish
  • Whats the best primer-surfacer these days? | The H. A. M. B.
    the best primer surfacer is actually a polyester primer filler, such as Claussens All U Need and Featherfill Slicksand These products will fill up to 012" voids, and actually fill better than urethane primers Urethane may fill up to 002-003" at best
  • high build sprayable filler primer | The H. A. M. B. - The Jalopy Journal
    It depends on how much filling you need U-POL is the best stuff I've shot in my 34 years of painting REFACE is their Polyester Fill Primer UP - 2225 Urethane is their High Build Urethane Primer www autobodytoolmart com sells the U-POL UP2252 stuff TCP Global sells the REFACE www tcpglobal com I won't use anything else
  • Hot Rods Can filler go over epoxy primer? - The Jalopy Journal
    Over epoxy primer, the same process occurs but the moisture is denied bare steel due to the primer Problem solved Both processes will work, but on my cars, they are body worked, epoxy primered, body filler, sanded, polyester primer or high build, blocked, sealed and painted


















中文字典-英文字典  2005-2009