英文字典中文字典


英文字典中文字典51ZiDian.com



中文字典辞典   英文字典 a   b   c   d   e   f   g   h   i   j   k   l   m   n   o   p   q   r   s   t   u   v   w   x   y   z       







请输入英文单字,中文词皆可:

killdee    
n. 一种小水鸟[北美产]

一种小水鸟[北美产]


请选择你想看的字典辞典:
单词字典翻译
killdee查看 killdee 在百度字典中的解释百度英翻中〔查看〕
killdee查看 killdee 在Google字典中的解释Google英翻中〔查看〕
killdee查看 killdee 在Yahoo字典中的解释Yahoo英翻中〔查看〕





安装中文字典英文字典查询工具!


中文字典英文字典工具:
选择颜色:
输入中英文单字

































































英文字典中文字典相关资料:


  • Set the gains on the head unit first. . | DIYMobileAudio. com . . .
    If using an external amp the head unit should be tested to find it's maximum usable unclipped level at the pre-amp outputs The distortion of the internal amp is irrelevant if you're not using it (assuming it even has a built-in amp as most higher end units do not)
  • Amplifier Level Setting Guide - Creative Audio
    Connect the AC voltmeter to the speaker output of the amplifier Make sure to measure the voltage at the correct connectors (+ and -) Increase the input sensitivity control until the desired voltage (determined in Step 5) is delivered
  • Setting gain on a power amp | Audiokarma Home Audio Stereo . . .
    I think the generally accepted practice is to set the amp wide open and then adjust the gain with the preamp control, UNLESS doing that overpowers the amp into distortion Then set the preamp voltage to just below the level of input to the amp which will allow full power on the amp
  • Live sound: How to set the levels on the power amplifier
    The level control on your live sound power amplifier is, in most cases, a purely passive device It doesn't control the gain of the amplifier - it controls the level of the incoming signal before it goes to the amplifier circuit All it can do therefore is make the input signal smaller
  • Why should i run my amps at full volume? : r livesound - Reddit
    “Power Amplifiers: Start with the amp’s level controls halfway up Set your mix to read around 0 on the mixer meters, then turn up the power-amp level until the sound is as loud as you want it It’s a mistake to run a power amp wide open (full volume)
  • Audio Power Amplifier Maximum Input Voltage - Prosoundtraining
    Most default to “unity gain” which means that the output level is the same as the input level A problem shows up when we get to the power amplifier If its input sensitivity is +4 dBu, then the signal level from the mixer (or DSP) is 20 dB higher than what is required to drive the amplifier to its full output voltage
  • Settings on an Amplifier and how to set them – CT SOUNDS
    Your desired voltage is going to be equal to the square root of resistance times power If you have4-ohm speakers and your power is 150w, then you just need to calculate the square root of 4x150 In this example, we’re aiming for a voltage of 24 49





中文字典-英文字典  2005-2009