英文字典中文字典


英文字典中文字典51ZiDian.com



中文字典辞典   英文字典 a   b   c   d   e   f   g   h   i   j   k   l   m   n   o   p   q   r   s   t   u   v   w   x   y   z       







请输入英文单字，中文词皆可：


请选择你想看的字典辞典：
单词字典翻译
gumbolike查看　gumbolike　在百度字典中的解释百度英翻中〔查看〕
gumbolike查看　gumbolike　在Google字典中的解释Google英翻中〔查看〕
gumbolike查看　gumbolike　在Yahoo字典中的解释Yahoo英翻中〔查看〕

安装中文字典英文字典查询工具!


中文字典英文字典工具:
选择颜色:
输入中英文单字

































































英文字典中文字典相关资料:


  • sealing outboard mounting bolts on new transom
    Re: sealing outboard mounting bolts on new transom What you want to do sounds like a Cadillac solution, when the Chevy solution everyone's been using since time immemorial works just fine In other words, I agree with Bond-o above; some 3M 4200 (or 5200) on the bolts will do the job If there is a problem with what you propose, it is this: what if you need to raise the motor on the transom (i
  • What to use for sealing transom motor bolts - iboats Boating Forums
    Re: What to use for sealing transom motor bolts Another product is Boat Life sealer I used it on my motor mount bolts (40hp) three seasons ago No sign of leaking And it stays fairly flexable, won't get hard and brittle It is designed to seal marine applications that you will have to get apart eventually It is NOT silicone, and takes almost a full week to cure, but I think it is a great
  • What is the best sealant for sealing motor mount holes?
    Re: What is the best sealant for sealing motor mount holes? No, my new motor mount fits existing holes in transom I am looking for the proper sealant for sealing the mounting bolts and holes I did get some 3M 5200 today, figure with the remaining prep before first water I will have time for proper drying of the 5200
  • Bolts for mounting motor to transom - iboats Boating Forums
    Re: Bolts for mounting motor to transom I redid the transom on my 50's starcraft about 3 yrs ago I got the stainless bolts at ace As mentioned above get the nylon, lock nuts due vibration I just made a aluminum plate out of 80 thousands 7075 that was about 3'' tall and extended horizontally about 3'' past the bolts on each side
  • How to properly mount an outboard - iboats Boating Forums
    How do I properly mount an outboard to a newly refurbished transom? 4 or 4 5 inch stainless bolts?
  • What Kind of bolts are used to mount Outboards
    Re: What Kind of bolts are used to mount Outboard's ? JJB, We normally use the largest bolt that will fit in the mounting holes (usually 3 8") I recommend stainless, with SS flat washers and SS locking nuts SS is plenty strong for this purpose Put some caulk on the bolts to seal them
  • Torque Specs for Mounting Outboard - iboats Boating Forums
    I just bought a 2003 Mercury 50hp 2 stroke motor I mounted it on my transom yesterday but didn't know the torque specs for the transom bolts I researched
  • Torque on transom bracket bolts - iboats Boating Forums
    Hello, I have a really old boat (1969) and I recently replaced the outboard However, I have no idea if I tightened the mounting bracket bolts (connecting outboard bracket to transom) to sufficient torque I did significant searches both here and on Google and didn't see a single mention of
  • Sealing Thru-transom Engine Mount Bolts - iboats Boating Forums
    Re: Sealing Thru-transom Engine Mount Bolts 3M 4200 will work, but why not drill out the holes over-size, full in with marine-tex, and re-drill? Now you have covered any bare wood, and have no worries
  • Outboard mounting bolt pattern? - iboats Boating Forums
    I have read that outboard mounting bolt patterns where standardized in the early 1980s Is this true? Will 2 different manufactures outboards of the same hp and shaft length match up to the holes already in my transom? Also is there a published template of the standard pattern s? Thanks





中文字典-英文字典  2005-2009