英文字典中文字典


英文字典中文字典51ZiDian.com



中文字典辞典   英文字典 a   b   c   d   e   f   g   h   i   j   k   l   m   n   o   p   q   r   s   t   u   v   w   x   y   z       







请输入英文单字，中文词皆可：


请选择你想看的字典辞典：
单词字典翻译
Scheuer查看　Scheuer　在百度字典中的解释百度英翻中〔查看〕
Scheuer查看　Scheuer　在Google字典中的解释Google英翻中〔查看〕
Scheuer查看　Scheuer　在Yahoo字典中的解释Yahoo英翻中〔查看〕

安装中文字典英文字典查询工具!


中文字典英文字典工具:
选择颜色:
输入中英文单字

































































英文字典中文字典相关资料:


  • Engineering Geology Field Manual - Volume II - 2nd Ed. - Chapter 22
    Drill rod energy ratio is determined by measuring the force-time history in the drill string Both acceleration and force-time history can be measured and are important in determining the normalized penetration resistance of sands for liquefaction resistance evaluations (ASTM D 6066)
  • Standard Penetration Test (SPT) for Foundation Design
    The standard penetration test (SPT) is made in boreholes by means of the standard 50 8 mm outside and 33 8 mm inside diameter split spoon sampler It is a very useful method for estimating the in-situ density of cohesionless soils, and when modified by a cone end, it can also be used to assess the relative strength or deformability of rocks
  • NOTES on the STANDARD PENETRATION TEST - Missouri University of Science . . .
    inches in a 18 inch sampling round (so, L1 = 12 inches) The Lacroix and Horn correction gives a more conservative estimate of the SPT blowcounts than that derived by Burmister’s (1948) energy correlation (discussed previously) The LaCroix and Horn correction appears most valid when sampling is undertaken
  • HOW TO CALCULATE CBR VALUE USING DCPT RESULT ON SITE?
    Calculate the value of penetration (in mm) for each blow by subtracting the previous recorded reading (i e reading on scale) from the current reading Calculate the cumulative depth of penetration (in mm) for each blow by adding all the previous individual depth of penetrations
  • Standard Penetration Testing (SPT) - Geoengineer. org
    Standard penetration test (SPT) N-value – the number of hammer blows required to drive a drill rod with an attached soil sampler 300 mm or 12 inches into soil (or weak rock); this N-value yields information on the geotechnical engineering properties of the soil (Jackson, 2019)
  • Standard Penetration Test - Geotechdata. info
    The Standard Penetration test (SPT) is a common in situ testing method used to determine the geotechnical engineering properties of subsurface soils It is a simple and inexpensive test to estimate the relative density of soils and approximate shear strength parameters
  • The Standard Penetration Test (SPT) - ProjectEngineer
    How to calculate the N-value using the Standard Penetration Test Correction factors are explained, including equations, and how to apply them
  • Penetration Rate Calculation for Drilling Technology Applications
    Calculate the torque required to drill a well with a rotary steerable system, given a mud weight of 12 ppg, a hole diameter of 8 5 inches, and a penetration rate of 100 ft hr What is the estimated time required to drill a section of 5000 feet at an average ROP of 50 ft hr?
  • Standard Penetration Test Simplified - Soil Mechanics - Civil . . .
    Engineers use standard formulas and empirical correlations to convert the N-value into an estimated bearing capacity However, since these correlations provide only an estimate, for more precise determinations, it is advisable to conduct shear tests to accurately measure the soil's strength
  • Penetration Depth Calculator - SURAGUS
    This tool calculates the Standard Penetration Depth – the depth at which the eddy current density has decreased to 1 e of the surface density – according to the following equation for an eddy current sensor at an operating frequency f:





中文字典-英文字典  2005-2009