英文字典中文字典


英文字典中文字典51ZiDian.com



中文字典辞典   英文字典 a   b   c   d   e   f   g   h   i   j   k   l   m   n   o   p   q   r   s   t   u   v   w   x   y   z       







请输入英文单字，中文词皆可：


请选择你想看的字典辞典：
单词字典翻译
Colluding查看　Colluding　在百度字典中的解释百度英翻中〔查看〕
Colluding查看　Colluding　在Google字典中的解释Google英翻中〔查看〕
Colluding查看　Colluding　在Yahoo字典中的解释Yahoo英翻中〔查看〕

安装中文字典英文字典查询工具!


中文字典英文字典工具:
选择颜色:
输入中英文单字

































































英文字典中文字典相关资料:


  • Firewall rules for ICMP (TCP UDP port 7) - Cisco Learning Network
    While the default port descriptions can help, this could be a bespoke server that ran runs a custom service on port 7 If the destination is a specific server in your network, that will make it a lot easier You can then approach the administrator owner of that server and ask them what the port is used for and if it's still required
  • Switch is UP. But unable to ping or telnet. - Cisco Learning Network
    Gerard, No port security configured Brian, IP address configured on the switch and it is on the same subnet As I told earlier, when I reboot the switch I was able ping and telnet by the IP - 10 10 172 229 It stays online for 2,3 minutes and got disconnected At the same time switch is UP and i am seeing the layer 2 informations
  • Cisco Learning Network
    Default Description OneTrust LLC (OneTrust) is a provider of privacy management software platform The company's platform supports organizations to adhere compliance with the data privacy, governance and security regulations across sectors and jurisdictions
  • Ping from routed switch to host - Cisco Learning Network
    I cannot ping the host from SW1's Vlan 1 IP address SW1 Vlan 1 192 168 1 3 SW2 Vlan 1 192 168 1 4 I want to be able to ping from the Vlan 1 interface so I can use host 1's tftp server as a backup Host 1's IP: 192 168 2 3 Vlan 2's IP: 192 168 2 1 25 The switches can ping each other's Vlan 1 interface
  • Cant ping between router and switch - Cisco Learning Network
    I changed router int g0 0 to be in same subnet of switch 192 168 10 2 24 I can now ping g0 0 from switch but have to assign default-gateway of 192 168 10 2 on each switch for each switch to be able to ping router I can ping router g0 1 172 16 1 1 from switch but cannot ping beyond this port (I have a computer connected with nic 172 16 1 2)
  • Cisco Learning Network
    Hi Frank I can think of a scenario where your interface is set to autonegotiation disabled, or "force-up," so it shows the port in an up-state, but the link really isn't up, as can be seen by the pings not working (speed nonegotiate under interface) The fibers could have been crossed and needed to be swapped, and when he replaced the cable
  • What UDP ports to open for UDP traceroute? - Cisco Learning Network
    The UDP datagram is dispatched with TTL = 1, destination UDP port= 33434, and the source port randomized The UDP destination port is incremented, the source UDP port is randomized, and the second datagram dispatched Step 2 is repeated for up to three probes (or as many times as requested in an extended traceroute command output) For each of
  • Port-Security Restrict Ping. - Cisco Learning Network
    I think I have port-security setup correctly, doing a "show port-security interface fa 0 1" tells me it's enabled and running in restricted mode My mac address is also stored in the port-security address table But if I connect another laptop into fa0 1 it will still allow me to ping my vlan1 address of 10 1 1 5, is this right?
  • Chasing MAC Addresses - Cisco Learning Network
    For example the core switch will show you what port the mac address in question is coming from, which will be the uplink port from an access switch Telnet or SSH into the access switch that was identified on the core switch port and use the "sho mac-address-table" along with the pipe command "|" again
  • Cannot ping to router when configuring addresses on VLAN interfaces
    However when I set up an ip address on the vlan 30 interface on the switches I can no longer ping anywhere I made sure to double check all my subnets for VLAN 30 VLAN 30 Subnet range is from 150 32 48 32 - 63





中文字典-英文字典  2005-2009